Flexible Duct Couplers for Portable Air Con 130mm (5.2 in)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3 types of flexible Portable Air duct couplers are attached suitable for joining 130mm OD PVC concertina pipe.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 116
- Wydruki
- 0
- Wyświetlenia
- 1767
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
3 types of flexible Portable Air duct couplers are attached suitable for joining 130mm OD PVC concertina pipe. (Pipe size is used for my Delonghi unit... there are other diameters used by some brands).
The extra 2m duct I ordered (non OEM) turned out to have a left handed spiral twist compared to that that came with the unit (right handed spiral twist) so attached are 3 versions to suit your needs.
RH pipe to RH pipe (female threads)
RH pipe to LH pipe (female threads)
LH pipe to RH aircon unit fitting (female and male thread)
all 3 types have a "L" or "R" marked on the ends to assist in putting the pipes together.
photos only show the last 2 types (I couldn't use the 1st type)
each part was about a 15h print time on my prusa
Last photo also shows my window adapter duct, you may get this at https://www.thingiverse.com/thing:3934575
Print instructions
PETG is preferable to PLA duct to hot air temps and a bit of flexibility/strength.
No raft/supports needed.
I have included a gcode for the R-R type only, note this is a single colour (non MMU) print ... attached gcode file have tagged in my printer MMU type. If in doubt re-slice to suit you requirements (Filament etc)