Pico MMU Hub for Sherpa Mini UPDATED
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updated for better reliability
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 132
- Wydruki
- 1
- Wyświetlenia
- 902
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update: LH made a new version of the hub so i updated it. Use Hub Top and Hub Bottom instead of Pico Hub if you want the new version. Old version is still fine so if you have it just use that. If you want to use guest lane feature where you skip Pico MMU and insert a lane temporarily use Hub Top Guest Lane. I didnt test the guest lane one yet so feel free to give any feedback.
Needs two voron (5 OD, 4 Length) M3 heatset insert. Only core plate and idler arm is different from the sherpa mini so if you have already printed sherpa mini you dont need to print the other parts again. If you dont have any parts for sherpa mini, go and download them from their github, the license doesnt allow me to share the parts. Needs 2x4 bowden tube between hub and extruder. Try to create a chamfer on the hub side of the bowden tube for better alignment of the filament. Print hub with 0.08mm layer height if possible. Or better use resin printer (not tested).