Mini ITX case for 10 inch rack V2.1 - split
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A split ITX case for a 10" rack. Can print even on the Prusa MINI.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 169
- Wydruki
- 0
- Wyświetlenia
- 2246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v2.0
It is a 2U shelf for mounting a mini-itx motherboard in a 10" rack cabinet.
For switches and ports, I quote heron's original model description:
It supports a 12mm momentary switch, and a 2x USB3.0 ports connector.
The two parts of this model do not need to be glued as the motherboard will probably hold. I did it with mine and the motherboard is not flexing, so it should be fine. It is a bit tricky to crew in the motherboard to two separate pieces, so be warned. I suggest first screwing in the motherboard and then mounting it in the rack.
THE CASE DOES NOT HAVE SPACE FOR ANY FORM FACTOR PSU. YOU WILL NEED A PICO PSU OR AN EXTERNAL MOUNT.
PRINTING INSTRUCTIONS:
- 180mm Z height
- 140 x 90 mm bed
- It is VERY STRONGLY discouraged to print in PLA, as it softens and deforms under temperature
- Print in PETG, ABS, ASA, etc.
- Use 60% gyroid infill (you want strength in nearly all directions
- Use 4 bottom and top layers