Brake Bias Knob for CTS288 and PEC11H
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Brake Bias Knob for CTS 288 Encoder (0.250'' Shaft) and for PEC11H encoder (6mm shaft)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There is 2 design one for the CTS 288 encoder with a 0.250-inch shaft and one for PEC11H encoder with a 6mm shaft.
I've created two models:
A 2-part version for single-color printers, which includes the knob and a cap to be glued into it. The cap is designed to be dual-color with 0.1mm layer.
A single-piece version for multi-color printers, which is essentially the same design but in one integrated part.
There's a hole for an M4x5 set screw to secure the knob to the encoder.
For the CTS288 you might need to shorten your encoder shaft to make it work with your project.