NA/NB Miata Flyinmiata Rear Swaybar Bushings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
New 3D printed bushings for the flyinmiata swaybar (Or any other 16mm swaybar), in case yours didn't come with bushings.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 463
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- GNU General Public License v3.0
The swaybars I bought for my NB Miata didn't come with rear swaybar bushings, so I made my own.
Printed them in TPU (Bambulab TPU, might've been 95A) at 100% infill and they held up for 3 years and 20.000 km perfectly fine.
I've tweaked the design a bit to fit slightly better and print easier, you can print it vertically so the layer lines match the rotational axis of the swaybar.
The picture you see is of the original model, after 3 years of usage. It's mostly just a bit dirty.