Gridfinity Optimized Jumper Wire Comb - Fixed Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity compatible optimized jumper holders, lighter and prints faster with the same functionality
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 120
- Wydruki
- 2
- Wyświetlenia
- 466
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Gridfinity compatible adjustable jumper/dupont wire comb holds your jumpers. I redesigned the model in FreeCAD. I figured most people don't need the comb holders in the middle since you could print the smaller versions if you needed to, so I got rid of those, and some more while keeping it structurally stable. I currently don't have a base with 3 units of length because FreeCAD freaks out, I am uploading the .FCStd project too if you want to modify it further. I used Stu142's FreeCAD Gridfinity Workbench as a base.
With my slicer settings, the 5-units optimized model prints in 1 hour and 23 minutes and weighs 34.4 grams. The original prints in 2 hours and 5 minutes and weighs 51.8 grams.
Thats a reduction of -33% print time and filament usage. Thats not to say OrdinaryWonder's model is bad, thanks for the original model! I liked the functionality and wanted to limit my filament usage.
In the photos I used @Stefterv_125157's higher density wire comb, link here https://www.printables.com/model/428684-gridfinity-adjustable-jumper-wire-comb-higher-dens
Slicer settings I used:
- Nozzle: 0.4mm
- Wall loops/perimeters: 3
- top/bottom layers: 3
- Infill: %10, Cross Hatch
- Mouse Ear brims enabled
- Inner/Outer wall printing order to help with overhangs