Gridfinity Optimized Jumper Wire Comb - Fixed Base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gridfinity compatible optimized jumper holders, lighter and prints faster with the same functionality
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 119
- Makes
- 2
- Views
- 462
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Gridfinity compatible adjustable jumper/dupont wire comb holds your jumpers. I redesigned the model in FreeCAD. I figured most people don't need the comb holders in the middle since you could print the smaller versions if you needed to, so I got rid of those, and some more while keeping it structurally stable. I currently don't have a base with 3 units of length because FreeCAD freaks out, I am uploading the .FCStd project too if you want to modify it further. I used Stu142's FreeCAD Gridfinity Workbench as a base.
With my slicer settings, the 5-units optimized model prints in 1 hour and 23 minutes and weighs 34.4 grams. The original prints in 2 hours and 5 minutes and weighs 51.8 grams.
Thats a reduction of -33% print time and filament usage. Thats not to say OrdinaryWonder's model is bad, thanks for the original model! I liked the functionality and wanted to limit my filament usage.
In the photos I used @Stefterv_125157's higher density wire comb, link here https://www.printables.com/model/428684-gridfinity-adjustable-jumper-wire-comb-higher-dens
Slicer settings I used:
- Nozzle: 0.4mm
- Wall loops/perimeters: 3
- top/bottom layers: 3
- Infill: %10, Cross Hatch
- Mouse Ear brims enabled
- Inner/Outer wall printing order to help with overhangs