Tapo C200 Corner Mount – 3D Printable Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Corner mount bracket for the TP-Link Tapo C200 camera. Installs with double-sided tape, no wall drilling required.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a custom-designed corner mount for the TP-Link Tapo C200 indoor security camera. The bracket allows for clean, discreet installation directly into a room corner using strong double-sided tape, no drilling or screws into the wall required.
Key Features:
Designed to hold the original Tapo C200 mounting base securely.
Mounts into a 90° room corner using double-sided adhesive tape.
The camera’s original base can be attached to the bracket with screws or double-sided tape, both options are supported.
A dedicated cable channel between the bracket arm and wall mount section allows the power cable to run cleanly downward or upward along the wall, preventing it from hanging loosely.
No supports are needed for 3D printing, the model is optimized for easy, clean printing.
Minimalistic design that blends well into any interior and improves camera placement options.
3D Printing Instructions:
Orientation: Print upright, exactly as shown in the model.
Supports: Not required.
Infill: 15–25% is sufficient for indoor use.
Filament: PLA, PETG, or similar rigid material.
This mount provides a simple, wall-friendly solution to install your Tapo C200 in the perfect corner spot, with tidy cable management and no need for tools or wall damage.