Cosmos Kids Watch - Charging Cradle (magnet inserts)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Charging cradle for a Cosmo kids watch. Can be used with or without the charging cable. Spots for five 6x3 magnets too.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Standard Digital File License
If you buy this model and need any modifications, I'll be happy to do that and resend the new file.
I printed a draft at 0.28 layers in PLA.
Designed for five 6x3mm magnets to be press fit. Works great as is but I did size the magnet holes up 0.1mm for a slightly easier fit. That said, magnet fit can vary a lot and you may need glue and/or slicer hole compensation to get it right.
The Cosmo cable fits into place with a good firm push. I added a small strip of double-sided VHB tape just to stop the plug from moving around at all (it didn't anyhow, but as a precaution).