1 / 4
Tool holder for the left side of the Core One — zdjęcie 1
1 / 4

Tool holder for the left side of the Core One

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tool holder for the left side of the Core One / Werkzeughalter für die linke Seite des Core One

Ocena
4,778 / 5
Polubienia
78
Pobrania
297
Wydruki
8
Wyświetlenia
1284
Oceny
9

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Tool holder for the left side of the Core One

I wanted a simple tool holder for the left side of the Core One without lining the entire side.

Complements my side bin.
https://www.printables.com/model/1375148-core-one-side-bin-core-one-seitenbehalter

This can be attached with two M3 x 8 screws (and nuts).

The two hexagons are optional and help prevent the holder from swinging. Two 10 mm x 2 mm magnets are required for this.

If desired, the two parts of the holder can be screwed together with an M3 screw and M3 nut.

I do not allow any commercial use of the design or parts of it.
------------------------------------------------------------------------------------------------------------

Werkzeughalter für die linke Seite des Core One

Ich wollte einen einfachen Werkzeughalter für die linke Seite des Core One, ohne die komplette Seite auszukleiden.

Passt zu meiner Seitenaufbewarung.
https://www.printables.com/model/1375148-core-one-side-bin-core-one-seitenbehalter

Dieser kann mit zwei M3 x 8 Schrauben und Muttern befestigt werden.

Die beiden Sechsecke sind optional und helfen gegen ein Schwingen des Halters. Hierzu sind zwei 10mm x 2mm Magneten erforderlich.

Die beiden Teile des Halters können falls gewünscht mit einer M3 Schraube, sowie M3 Mutter verschraubt werden.

Ich schließe hiermit nochmals alle kommerzielle Nutzung des Designs und/oder Teilen davon ausdrücklich aus.

Tagi