1 / 4
Tool holder for the left side of the Core One — image 1
1 / 4

Tool holder for the left side of the Core One

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Tool holder for the left side of the Core One / Werkzeughalter für die linke Seite des Core One

Rating
4.778 / 5
Likes
78
Downloads
297
Makes
8
Views
1,284
Reviews
9

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Tool holder for the left side of the Core One

I wanted a simple tool holder for the left side of the Core One without lining the entire side.

Complements my side bin.
https://www.printables.com/model/1375148-core-one-side-bin-core-one-seitenbehalter

This can be attached with two M3 x 8 screws (and nuts).

The two hexagons are optional and help prevent the holder from swinging. Two 10 mm x 2 mm magnets are required for this.

If desired, the two parts of the holder can be screwed together with an M3 screw and M3 nut.

I do not allow any commercial use of the design or parts of it.
------------------------------------------------------------------------------------------------------------

Werkzeughalter für die linke Seite des Core One

Ich wollte einen einfachen Werkzeughalter für die linke Seite des Core One, ohne die komplette Seite auszukleiden.

Passt zu meiner Seitenaufbewarung.
https://www.printables.com/model/1375148-core-one-side-bin-core-one-seitenbehalter

Dieser kann mit zwei M3 x 8 Schrauben und Muttern befestigt werden.

Die beiden Sechsecke sind optional und helfen gegen ein Schwingen des Halters. Hierzu sind zwei 10mm x 2mm Magneten erforderlich.

Die beiden Teile des Halters können falls gewünscht mit einer M3 Schraube, sowie M3 Mutter verschraubt werden.

Ich schließe hiermit nochmals alle kommerzielle Nutzung des Designs und/oder Teilen davon ausdrücklich aus.

Tags