Panasonic Q Shuriken HDMI Bracket Remade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remake of the HDMI bracket from Drunkenmonk's Open-source Shuriken HDMI MOD for the Panasonic Q.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
The HDMI bracket supplied in the Git just doesn't fit right on my support bracket with the PCB in place. The OG model raises the screws up a little too high and just doesn't engage the bracket, so I had to design a new bracket from scratch using the dimensions I could use in the original STL, so this is made from scratch with new mounting holes so you can use the original screws to mount the PCB and bracket.
I did use 1mm thick nylon washers under the PCB due to the HDMI port's ground tabs ever so slightly sticking out below the PCB. The new bracket design has no issues with this and using the original screws.