Panasonic Q Shuriken HDMI Bracket Remade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remake of the HDMI bracket from Drunkenmonk's Open-source Shuriken HDMI MOD for the Panasonic Q.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 14
- Makes
- 0
- Views
- 83
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Share Alike
The HDMI bracket supplied in the Git just doesn't fit right on my support bracket with the PCB in place. The OG model raises the screws up a little too high and just doesn't engage the bracket, so I had to design a new bracket from scratch using the dimensions I could use in the original STL, so this is made from scratch with new mounting holes so you can use the original screws to mount the PCB and bracket.
I did use 1mm thick nylon washers under the PCB due to the HDMI port's ground tabs ever so slightly sticking out below the PCB. The new bracket design has no issues with this and using the original screws.