Hotend mount for the e3d v6 on the Tevo Tornado
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hotend mount for the e3d v6 on the Tevo Tornado, it might also work with the CR-10 but I did not test that.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 76
- Wydruki
- 1
- Wyświetlenia
- 763
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Hotend mount for the e3d v6 on the Tevo Tornado, it might also work with the CR-10 but I did not test that.
I switched from my anet a8 to the tevo tornado and I missed the e3d hotend (I had a e3d v6 on my anet). The printquality of the e3d v6 hotend is just a tiny bit better than the original one.
I used the frame-piece of "DemolitionX" and slightly modified it so you can mount a BLTouch sensor to it. I used the BLtouch mount of "gdramos". So the BlTouch offsets are;
- x=42,5mm
- y=12,5mm
- z=0mm
The marlin software can be downloaded here:
https://www.dropbox.com/s/lfg2wd5sq3f0wtw/Tornado_Firmware_Updated.zip?dl=0
installation guide:
https://www.youtube.com/watch?v=mBwHGuX5de8
Hardware:
Original screws
e3D v6+BlTouch (of course)
5015 Blower fan
Print:
1x e3d v6 mount with BLTouch_fixed.stl
1x e3d_v6_modular_fang.stl
I also included the version without the BlTouch