Hotend mount for the e3d v6 on the Tevo Tornado
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hotend mount for the e3d v6 on the Tevo Tornado, it might also work with the CR-10 but I did not test that.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 76
- Makes
- 1
- Views
- 763
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Hotend mount for the e3d v6 on the Tevo Tornado, it might also work with the CR-10 but I did not test that.
I switched from my anet a8 to the tevo tornado and I missed the e3d hotend (I had a e3d v6 on my anet). The printquality of the e3d v6 hotend is just a tiny bit better than the original one.
I used the frame-piece of "DemolitionX" and slightly modified it so you can mount a BLTouch sensor to it. I used the BLtouch mount of "gdramos". So the BlTouch offsets are;
- x=42,5mm
- y=12,5mm
- z=0mm
The marlin software can be downloaded here:
https://www.dropbox.com/s/lfg2wd5sq3f0wtw/Tornado_Firmware_Updated.zip?dl=0
installation guide:
https://www.youtube.com/watch?v=mBwHGuX5de8
Hardware:
Original screws
e3D v6+BlTouch (of course)
5015 Blower fan
Print:
1x e3d v6 mount with BLTouch_fixed.stl
1x e3d_v6_modular_fang.stl
I also included the version without the BlTouch