1 / 3
Half U 10 Inch Server Rack Mount For Samsung T7 Shield Portable SSD
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1/2 U 10 inch server rack mount for up to 3 Samsung T7 Shield portable SSDs
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is a ½ U mount for 10 inch server racks that can hold up to 3 Samsung T7 Shield portable SSD drives. This mount is symmetrical and can be mounted either above or below another ½ U accessory in the rack. This is a snug fit, so the drives shouldn't fall out with normal handling of the rack.
Notes
- This mount only fits the Samsung T7 Shield, I have not tested it with other drives. I don't think it will work with the non-shield T7 variant since it lacks the rubber coating.
Printing
- This mount can be printed without supports when printed on its face (i.e. face down)
- PLA or PETG should work fine, I used the following settings for my prints:
- 0.4mm nozzle
- 0.2mm layer height
- 3 wall loops
- 3 top shell layers
- 3 bottom shell layers
- 20% infill density