Yarn cone winder v2 - motorized ver.for JGA25-370
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the YARN WINDER v2 MOTORIZED version adapted for the JGA25-370 motor.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 241
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the YARN WINDER v2 MOTORIZED version adapted for the JGA25-370 motor.
In the remix, I added:
- GEAR_24 version for the JGA25-370 motor
- YARN_Housing_bottom version for the JGA25-370 motor
- YARN_Housing_bottom version for the JGA25-370 motor with six M3x5x4.2mm heat inserts
Parts needed:
- M6 rod 147 mm (grooved drum fork shaft)
- M6 rod 66 mm (winding shaft)
- M6 rod 20mm (connection between upper and lower grooved drum cap, loose fit)
- M6 nyloc hex nuts (manual 4x, motorized 3x)
- M6 normal hex nuts (manual 2x, motorized 1x)
- lock big gear in place (only in manual version)
- top of fork shaft (so you can hand-adjust how tight or loose the drum fork can move) - M3 screws 6mm (manual 4x, motorized 11x)
- M3 screws 20mm (2x, fork arm)
- M3 screw 35mm (1x, yarn tensioner)
- M3 hex nuts (2x, fork arm inside housing)
- Skateboard bearing 608-2RS (3x)
- short rubber band (for grooved drum)
- long rubber band (as drum fork spring, not too strong!)
- six M3x5x4.2mm heat inserts (OPTION)
Link to the kit(affiliate link):
JGA25-370 motor along with 12V DC speed controller.
CONCLUSION 💚💚💚If you enjoyed the project please like it.💚💚💚 Post your makes and let me know how it works out for you. If anyone has any comments about them - I'd be happy to listen and improve the models. ☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕ Did my project bring you joy, save you time, or solve your problem? Share your experience with me and brighten my day—buy me a Ko-fi! ☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕☕ |