Dog Collar Air Tag Holder - Lid / Front Cover Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified lid for @Cbesheff_1902077's dog collar air tag holder
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of @Cbesheff_1902077's Dog Collar Air Tag Holder: https://www.printables.com/model/1313411-dog-collar-air-tag-holder-weatherproof/files
You will need:
-Remixed Lid
-Bottom Seal (please download from original creator)
-Base Plate (please download from original creator)
-Four M3x14 screws (https://a.co/d/3IXbzK7)
-Four M3 nuts (https://a.co/d/cFjJwkG)
The M3 nuts should hold in place while you tighten or loosen the screws. If you are using M3x14 screws they should be just long enough to thread fully through the nut without poking out too much. The screw heads should also be flush or indented in on the back of the base plate (see pics). If done correctly, no screws should be poking out or creating an obstructive or sharp environment. This has been tested on a very active dog's collar for over a month and it's holding up great! It is still very secure and has not loosened up one bit (although it definitely needs a cleaning, lol). I also included a blank lid so you can add your own text!
Lastly, please read and follow the print / assembly instructions from the original creator (minus the instructions involving screws or threaded inserts). Link is above for easy access!