1 / 8
Dog Collar Air Tag Holder - Lid / Front Cover Remix — image 1
1 / 8

Dog Collar Air Tag Holder - Lid / Front Cover Remix

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Modified lid for @Cbesheff_1902077's dog collar air tag holder

Rating
0 / 5
Likes
9
Downloads
37
Makes
0
Views
162
Reviews
0

Updated at source:

Model information

Category
Pets
License
Creative Commons — Attribution — Noncommercial

This is a remix of @Cbesheff_1902077's Dog Collar Air Tag Holder: https://www.printables.com/model/1313411-dog-collar-air-tag-holder-weatherproof/files

You will need:
-Remixed Lid
-Bottom Seal (please download from original creator)
-Base Plate (please download from original creator)
-Four M3x14 screws (https://a.co/d/3IXbzK7)
-Four M3 nuts (https://a.co/d/cFjJwkG)

The M3 nuts should hold in place while you tighten or loosen the screws. If you are using M3x14 screws they should be just long enough to thread fully through the nut without poking out too much. The screw heads should also be flush or indented in on the back of the base plate (see pics). If done correctly, no screws should be poking out or creating an obstructive or sharp environment. This has been tested on a very active dog's collar for over a month and it's holding up great! It is still very secure and has not loosened up one bit (although it definitely needs a cleaning, lol). I also included a blank lid so you can add your own text! 

Lastly, please read and follow the print / assembly instructions from the original creator (minus the instructions involving screws or threaded inserts). Link is above for easy access!