1 / 2
Makita Track Saw to 2.5in Vacuum Port Adapter — zdjęcie 1
1 / 2

Makita Track Saw to 2.5in Vacuum Port Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An adapter to connect a 2.5in shop vac hose to a Makita track saw

Ocena
0 / 5
Polubienia
6
Pobrania
53
Wydruki
0
Wyświetlenia
286
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

This is a press-fit adapter to connect common 2.5 inch shop vac hoses to a Makita track saw.

No hardware is needed, the adapter replaces the original dust port that comes with the saw. You have to unscrew the blade guard to swap the parts. I recommend you take the O-ring off of the original port and switch it over to this new one. There is a groove designed for it in the model.

There is a 45deg angle to help keep the hose from dragging on the workpiece and/or table, just like the original.

The hose is press-fit. The inner diameter of the hose side is 57.8mm and is a tight fit around the vacuum hose.

Recommend to print with at least 4 walls. I used regular tree supports for the print. I printed mine in ABS, but other materials may work too.

Tagi