1 / 4
Cyberpunk 2077 Dominator Titanium RAM Faction Plates
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cyberpunk faction plates for the corsair Dominator Titanium RAM
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 289
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
Hello choom,
don't be a gonk and use these faceplates for your Corsair Dominator Titanium RAM modules.
Choose your favourite faction or use them all!
Get creative and print them see through so your RGB gamer lights can shine through!
---
Print settings used:
Layer height: 0.1 mm
Nozzle: 0.4 mm
Sparse infill density: 50%
This is just what i used, play around with it a bit, whatever fits you best. Also probably should be printed in something more heat resistant than PLA since it's going in a PC.
