Liczymy pasujące modele…
This model is a remix of Eplolako's model. I printed his and painted it (see photos) but it's printed horizontally on the bed from the middle up since he split the entire model down the middle. This causes a very noticeable loss of…
A simple, easy to assemble model of the Thermal Katana from Cyberpunk 2077. The katana is 1.3m long. This version does not have room for electronics. Some filing/sanding may be necessary to fit parts together depending on your printer.…
This model (or these models) are just an image of the arasaka text and logo, turned in to an svg, and then loaded up in to openscad to be extruded to give them some depth. If you want them more or less thick you can edit the .scad files…
This is the Arasaka Shingen smart SMG from Cyberpunk 2077 There are a lot of parts for this, especially the scope. I may create detailed and simple versions so that people can choose which they prefer This model is still a work in…
CyberPunk Balisong (Comb) Arasaka logo + full printable hardware/ Perfect trainer knife
Kličenka ve stylu cyberpunk2077 - Arasaka Doporučují tisknout s tryskou 0.25 vzhledem k písmu. 0.25 nozzle recommendation
This is a fully accurate version of the Arasaka logo from cyberpunk, similar to my other model that was derived from it
A powerful reminder that in Night CIty, no matter how the dice roll, the house always wins. Prints in three parts, required print dimensions 200x200x250mm
Another sign from Cyberpunk 2077 with Arasaka logo on it. Hope you will enjoy it :). 15x9x2.6cm Stand: https://www.prusaprinters.org/cs/prints/154505-sign-stand Print instructions Chage the filament color for last 3 layers 2 perimeters,…
Key card holder inspired by Cyberpunk 2077 Arasaka theme. There are two files for the top plates. One with name Tomas in Japanese on the bottom right, and the other without it. The two halves need to be glued together. There is a notch…
Paperweight / display piece incorporating the logo and colors from Cyberpunk 2077 's Arasaka corporation. Logo assets were referenced from the fan project at https://www.valencygraphics.com/cyberpunk-2077 Category: Props
This model prints quickly and is easy to assemble. It's a quick way to use up the last bits of filament on a nearly empty spool. It also makes a great filament swatch. Additionally, this is a good print to show off some more exotic…
Insert works with both Arasaka Balisong Butterfly Knife versions, this insert is for V2 specifically. To print Arasaka logo into the case on a same bottom layer, its possible to do with single extruder. See my guide how to here: MMU…
The dual extrusion folder contains 4 files. There are 2 versions of the USB print. The ones with the Arasaka Logo and one with the Relic logo. There are 2 parts the Black and Silver parts. Merge these 2 files in your slicing software.…
! PLEASE NOTE ! This is ONLY the LED MOD for the Arasaka Thermal Katana CyberPunk 2077 , not the entire katana. The model of the entire katana can be found at this link: Arasaka Thermal Katana CyberPunk 2077 Please click if you appreciate…
Remix of a model published here on Printables by user @Sable , from the original publication: Dice tower based off of Cyberpunk 2077 and Edgerunners' Arasaka Tower Prints in three parts, required print dimensions 200x200x250mm…
A wire frame version of the Arasaka logo from Cyberpunk for wall display if you do make one please upload an image as id love to see it on someone else's wall :)
I never liked how exposed the Corsair 4000 Case is, it looks too naked. I have printed this cover before, with aside the changes being an asymmetrical design, the connectors have been thickened to be rigid. Would also recommend printing…
I remixed the svg file from "ARASAKA letters with logo" and used this tutorial " How to make 3D Printed LED Letters sign (ft. BambuLab A1 Mini) " by Lukis3D Studio to create a LED Sign. If the space for led strips is too small, I suggest…
1U 10In rack blank plate with the Araska Logo on the front of it. Made to be printed using AMS or Multi tool head printer. I used Metallic Red and matte black PETG 10% infill, gyroid
I had a GPU lying around and wanted to get my feet wet with local LLMs. The design goal was to build a small form factor, power efficient AI rig with what I mostly had lying around at home. The result: a cyberpunk-inspired mini PC that…
es una cubierta para el cabezal de impresión con el logo de arasaka , usé una boquilla de 0,4 mm Para limpiar cualquier cuerda que quedara, simplemente le pasé un mechero durante un tiempo MUY breve
Print on a multi material printer and assign the respective color you want to use to the translucent parts. Cut up an LED strip into smaller strips and glue it to the backplate for a more even light distribution. Add another strip on the…
Part of the ExoGuitar project — full catalog, build planner, and assembly guides at https://exoguitar.com Plan Your Build & Get Hardware ExoGuitar can be confusing! Head over to our build planner to plan your entire build - it'll walk you…
Part of the ExoGuitar project — full catalog, build planner, and assembly guides at https://exoguitar.com Plan Your Build & Get Hardware ExoGuitar can be confusing! Head over to our build planner to plan your entire build - it'll walk you…
Print on a multi material printer and assign the respective color you want to use to the translucent parts. Cut up an LED strip into smaller strips and glue it to the backplate for a more even light distribution. Add another strip on the…
PC Fan Grill with Arasaka Logo – Cyberpunk 2077 Bring the vibe of Night City straight to your PC! 🚀 Presenting a unique fan grill model inspired by the Arasaka Corporation from Cyberpunk 2077. It’s the perfect addition for fans of…
22.11.2025 Updated: Added free slide travel This is a meticulously crafted 3D model of the JKE-X2 Kenshin, the iconic Arasaka tech pistol from Cyberpunk 2077. With a sleek, futuristic design, this model replicates the in-game weapon’s…
i Have other models, if these make success i will post the others. [Instruções em português] Marcador de página inspirado em Cyberpunk com logo da arasaka. O modelo tem 2 camadas, cada uma com 0,2 mm de altura. Recomendo imprimir a logo…
This is a high-quality 3D model of the iconic Ambition, a variant of the Arasaka JKE-X2 Kenshin, featured in Cyberpunk 2077: Phantom Liberty. The sleek, futuristic design of this tech pistol, combined with its power and precision, makes…
Made by me in tinkercad. Photo model printed in a Elegoo Neptune 4 pro 0.4 Nozzle PLA 1,75mm Black 1,75mm White Software Elegooslicer (did aswell in Orcaslicer and its the same) If you want to make doble color make sure the firmware is…
My (rough) recreation of the ARASAKA logo letters. Use the “a” multiple times to complete the logo. Letters are probably way too small, this is my first upload so please be patient with me and maybe try scaling it up. Have fun.
Please click if you appreciate my work :) Arasaka Thermal Katana – Cyberpunk 2077 length 1.12 m A model inspired by the legendary Thermal Katana from Cyberpunk 2077 . Designed specifically for 3D printing on small build plates (e.g.,…
I made this because there isn't a lot of Cyberpunk stuff on here. I plan to upload a lot more Cyberpunk related items as I get better at CAD. I hope you enjoy!
ARASAKA katana stand Cyberpunk 2077 Please click if you appreciate my work :)
Hey, i wanted to make a armor parts for a cosplay i want to do. I want to cosplay cyber samurai inspired by Oda from Cyberpunk 2077. In future i might upload more armor parts. There is a hole for a velcro or another kind of strap that is…
NEW VERSION HERE V2 The Arasaka Nexus SFF is a compact small-form-factor PC case concept inspired by futuristic corporate-industrial design. Featuring a clean floating front panel with a recessed Arasaka logo, the case balances minimalist…
Magnet Size 5x2mm. The Arasaka Nexus SFF is a compact small-form-factor PC case concept inspired by futuristic corporate-industrial design. Featuring a clean floating front panel with a recessed Arasaka logo, the case balances minimalist…
My lovely Printables Family <3 THE NEWEST ADDITION TO THE EVER GROWING SELF DEFENSE LINE IS FINALLY HERE: https://www.printables.com/model/704603-night-raids-ultimate-karambit-knuckle-duster-fully Go show some love to a killer set of…
I made this one because the one i found did not have the logo on it. It does have the insert for the balisongs.
CYBERPUNK 2077 Arasaka HJKE-11 Yukimura SKIPPY This is a high detail prop model-kit for 3d-printing. This model-kit contains 24 individual parts to ensure as much detail as possible. All parts have orientation indexes for easy assembly.…
CYBERPUNK 2077 Arasaka Shingen Mark V This is a high detail prop model-kit for 3d-printing. This model-kit contains 38 individual parts to ensure as much detail as possible. All parts have orientation indexes for easy assembly. The parts…
I created a Cyberpunk 2077 Arasaka keychain, suitable for the AMS You can choose your own creative color
I printed the coaster in two colors with a single extruder pausing the printing and changing the filament.
![[LED MOD] Arasaka Thermal Katana CyberPunk 2077](https://media.printables.com/media/prints/4a5f99a3-cfcd-4c65-87d0-12fd3543349c/images/11071272_a43f43fa-21cb-4833-b7c1-7d901d52a545_a74c36a9-0b00-4f30-8d44-22af3a603b85/img_2712.gif)
