ExoGuitar - Wing Sets - Arasaka
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed guitar part — full catalog, build planner, and assembly guides at https://exoguitar.com
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Part of the ExoGuitar project — full catalog, build planner, and assembly guides at https://exoguitar.com
Plan Your Build & Get Hardware
ExoGuitar can be confusing! Head over to our build planner to plan your entire build - it'll walk you through every available part and handle compatibility along the way, and it covers all ExoGuitar parts. It's also the best way to get hardware, since it lets you buy everything for a full build in one go, not just this part.
You can find this specific part, ExoGuitar - Wing Sets - Arasaka, on our site.
Hardware
DIY Kit
You can order a DIY kit for your entire build from our build planner, the estimate for this part's kit is $79.84 plus shipping.
Self Source
If you want to order the parts yourself, here's a list. Estimated cost: $194.97.
- 12x Screw - Button Head - M5x10
- 12x Nut - Slide In - M5
- 2x Heat Set Insert - M3 - 4.8mm OD - 4.6mm L - Flanged
- 10x Screw - Flat Head - M3x10
- 10x Screw - Flat Head - M3x20
- 100x LED Light - COB - 3mm
- 1x Jack Socket - DC5521
- 1x Battery - 12v 1200mAh
- 1x PAM8610 10W+10W 12V DC
- 1x Speaker - 4Ohm 5W
- 1x Toggle Switch - 3 Positions 9 Pin 15A 250VAC
- 6x Fiber Optic Rod - Clear - 2mm
- 1x 2020 Aluminum Extrusion - 250mm
- 1x 2020 Aluminum Extrusion - 200mm
- 20x Heat Set Insert - M3 - 5mm OD - 4mm L
- 2x Strap Buttons
- 1x Jack - Output - Mono 1/4in
- 1x Potentiometer - A500K - Volume