[LED MOD] Arasaka Thermal Katana CyberPunk 2077
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is ONLY a LED MOD for the Arasaka Thermal Katana CyberPunk 2077, not the entire katana.
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 123
- Wydruki
- 0
- Wyświetlenia
- 1208
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Standard Digital File License
! PLEASE NOTE !
This is ONLY the LED MOD for the Arasaka Thermal Katana CyberPunk 2077, not the entire katana.
The model of the entire katana can be found at this link:
Arasaka Thermal Katana CyberPunk 2077
Please click
if you appreciate my work :)
This is a modification of a single element of the Arasaka Thermal Katana, allowing the LED cable to be routed from the handle.
The 3mm LED strip fits into the element, giving it a seamless appearance.
Useful for cosplaying as a power bank.
🛠 Instruction:
I use a 3mm LED strip 5V LINK
for a katana, about 100 cm is enough
- Attach the LED as shown in the image blue color, but leave about 10cm exposed in front of the holder.
- Trim the LED with scissors so that the end fits inside the katana. (The LED strip has markings for cutting.)
- Pull the male USB cables through the hole on the side toward the LED strip.
- Solder the cables with a soldering iron:
- Red to 5V+
- Black to 5V-
- Connect the USB to the power bank to test if everything works.
- If ok secure the connection (heat shrink wrap, insulating tape, cyanoacrylate).
- Pull the USB cable to fit the LED strip inside the katana and glue it all the way in.
- Done :)
