FormD T1 Air Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Air Kit reduces temps and fan turbulence in the FormD T1.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 1204
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Standard Digital File License
Summary
Air Kit reduces temps, fan turbulence, and GPU fan speed in the FormD T1. It contains two parts that can be used together or individually: Fan Slab and Air Block.
Fan Slab
Fan Slab holds two 120mm fans and two 60mm fans. It prints in two pieces that snap together.
Fan-Mounting Options:
Standard Case-Fan Screw - Uses self-tapping case screws that are included with fans.
Threaded Heat-Set Insert - Uses M3X5X4 threaded heat-set inserts and M3 machine screws.
Air Block
Air Block fits either 4090/80 or 5090/80 Founders Edition graphics cards.
Case Options:
FormD T1 v2.1 - Front mount requires one M3X5X4 threaded heat-set insert, and attaches to side bracket brace with one M3-5 screw. Back/side mount uses one M3-5 screw.
FormD T1 v2.0 - Front mount uses one M3-8 screw, attached to the front-panel IO-port mount - Remove front panel to install. Back/side mount uses one M3-5 screw.
FormD T1 Two-Tone - Front mount requires one M3X5X4 threaded heat-set insert, and attaches to side rail with one M3-8 screw. Back/side mount uses one M3-5 screw.
Inspiration: EIGA - Exhaust Shroud NeedItMakeIt - 3D Printed Joinery