FormD T1 Air Kit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Air Kit reduces temps and fan turbulence in the FormD T1.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 95
- Makes
- 0
- Views
- 1,204
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Standard Digital File License
Summary
Air Kit reduces temps, fan turbulence, and GPU fan speed in the FormD T1. It contains two parts that can be used together or individually: Fan Slab and Air Block.
Fan Slab
Fan Slab holds two 120mm fans and two 60mm fans. It prints in two pieces that snap together.
Fan-Mounting Options:
Standard Case-Fan Screw - Uses self-tapping case screws that are included with fans.
Threaded Heat-Set Insert - Uses M3X5X4 threaded heat-set inserts and M3 machine screws.
Air Block
Air Block fits either 4090/80 or 5090/80 Founders Edition graphics cards.
Case Options:
FormD T1 v2.1 - Front mount requires one M3X5X4 threaded heat-set insert, and attaches to side bracket brace with one M3-5 screw. Back/side mount uses one M3-5 screw.
FormD T1 v2.0 - Front mount uses one M3-8 screw, attached to the front-panel IO-port mount - Remove front panel to install. Back/side mount uses one M3-5 screw.
FormD T1 Two-Tone - Front mount requires one M3X5X4 threaded heat-set insert, and attaches to side rail with one M3-8 screw. Back/side mount uses one M3-5 screw.
Inspiration: EIGA - Exhaust Shroud NeedItMakeIt - 3D Printed Joinery