Can holder for 330 ml cans with rotating protection lid – easy print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimalist can holder with twistable lid to block insects or similar. Snaps onto 330ml cans using their natural shape.
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 204
- Wydruki
- 1
- Wyświetlenia
- 1014
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Summer
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Can holder with rotating protection lid – easy print
A minimalist can holder for standard 330 ml cans. The can is inserted from the top and clicks into place at the bottom; removal works in reverse. The holder grips the can using its shape. A rotating lid protects the opening from insects and debris – ideal for outdoor use in summer. The model is lightweight, functional, and requires supports for printing.
Assembly
Remove the support material from the hole at the top of the handle. Align the ball joint of the lid and press it carefully into the hole — note that one side is slightly wider to ensure a secure snap fit.
Printing | |
 | |
| Material | PLA |
| Nozzle | 0.40mm |
| Layer Height | 0.20mm |
| Infill | 20% |
| Supports | Yes, on the handle for attaching the cover, specifically in the hole for the ball joint. |
| Brim | No |
| Print Orientation | Handle on Side, Cover on flat side |