Ender 3/Pro/V2 Extruder relocation/secondary Extruder bracket for Dual Z
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An extruder bracket designed for the Creality dual-z upgrade
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I can’t really come up with a good scenario for why you would want to swap sides with the stock Ender 3 extruder (weight balance maybe?) but if you have the dual-z upgrade installed, this will let you do it. this was designed for my own IDEX build, and based loosely off a kit that BTT used to sell.
BOM:
4 M3 x 5mm L x 5mm OD Heat SetThreaded Inserts
4 M3 x 8 Cap-Head Screws
4 M3 Lock Washers
I printed mine in PETG, four walls and 30% infill;I designed this to print without supports, sacrificial bridging will need to be removed prior to assembly. The stepper cradle is designed to slide up and down for an easier install; I would recommend installing the stepper and extruder after you’ve installed and tightened down the bracket on the X-axis.