Comfy 1/4 Screwdriver Handle, Long and Stubby Variants
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hexagon (ish) shaped handle, anti-roll and takes any generic 1/4 extension as its bit holder.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 17
- Wydruki
- 1
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Generic ¼ Screwdriver holder.
Designed to take any drive bit extension as its holder, just drive it in with a press or a hammer.
Used the prototype for a few months now in the workshop without any serious issues
Has a spinning palm cap for easier use, this needs a ball-spring grub screw for retention, I'l publish a simpler version soon.
There is a ¼ hex through the handle for using with an extension like a T handle, I wouldn't recommend it due to the printing tolerances but it might work out - this was designed initially to have a steel insert. This was originally developed as a project for work, but we moved in a different direction.
Update : Single Piece Handle uploaded, its slightly smaller and doesn't have the retention holes. It may need a little superglue on the extension for retention.
Originally developed as a project for work, but we moved in a different direction.