1 / 5
Prusa Core One :Descant box with TPU lid for the CoreOne — zdjęcie 1
1 / 5

Prusa Core One :Descant box with TPU lid for the CoreOne

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Box wich can stay in the spoolholtercompartment. (Used the door found here on printable, to seal the space))

Ocena
0 / 5
Polubienia
5
Pobrania
26
Wydruki
0
Wyświetlenia
326
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Printed in PETG   Lid with TPU filaflex 

Magnets 2  16x6 x 2mm

The box can stay in place with the lid on for short prints ore PLA.  Otherwise just open the lid. The chambers goes down to approx 17%.

Tagi