Slide Duplicator for Canon DSLR

Slide duplicator for Canon lens with a reverse ring.

It can transfert 24x36mm slides on a 50x50mm frame.

I use it on my Canon 50mm f/1.8 EF lens.

For the assembly, you'll need:

• 6 M3x8 bolts + nuts
• 1 or 2 M3x10 bolts + female threaded inserts M3x5x4
• a reverse ring (google: reverse ring or reverse mount with the filter's diameter of your lens)

Setup:

• make sure the tube slides: insert the larger in the thinner until they slide smoothly.
• fasten all the parts together with the M3x6 bolts/nuts (alternatively you can glue them)
• fix the duplicator on your lens
• insert a slide
• make the focus (I use the scratches as reference)
• block the position with the M3x10 bolt

Tips:

• use an uniform white light .
• I shot using exposure bracketing so I can choose the best exposition.

Print Settings

Rafts:

Yes

Supports: 

Doesn't Matter

Resolution:

0.2mm

Infill: 

20%

Filament: Various PLA 
 

Notes:

Support are optional. Printing with a 0.6mm extruder was ok for me.