1 / 2
10" Rack Mount 1U w/ Keystone Jacks | Fujitsu Futro S740 — zdjęcie 1
1 / 2

10" Rack Mount 1U w/ Keystone Jacks | Fujitsu Futro S740

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

1U rack-mount for Fujitsu Futro S740 for 10-inch racks with Keystone Jacks & Ventilation Vents on all walls

Ocena
0 / 5
Polubienia
12
Pobrania
117
Wydruki
0
Wyświetlenia
782
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

If you like the model, I would appreciate if you leave a ❤ like.

 

Rack Mount Bracket for Fujitsu Futro S740

This bracket is designed specifically for the Fujitsu Futro S740 switch, offering a clean and secure fit in your 10-inch rack setup.

 

Features:

  • Height: 1U
  • Rack: 10-inch
  • Perfect tight fit
  • Ventilation slots on the side walls for airflow
  • Ventilation slots on the bottom floor for airflow
  • Triangular push-up access hole
  • 2 Keystone Jacks on the front panel
  • Engraving on front panel

 

Printing Recommendations:
For the best surface finish, I recommend printing the model with the front panel facing down on the print bed. If printing in this orientation, be sure to add supports under the rear wall hooks. These are located at the top and would otherwise be suspended in mid-air during printing, which can cause sagging. A screenshot is included for reference.

 

🔧 Looking for more rack mounts in the same design style?
Check out my full collection here:
https://www.printables.com/@pablo_1344153/collections/2530188

💬 Need a custom rack mount for another device?
Feel free to leave a comment - I’m happy to help!

Tagi