Wall Key Holder with Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No screws. For printers above 30cm print volume.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 99
- Wydruki
- 1
- Wyświetlenia
- 639
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
I created this wallholder for keys with a little tray for some stuff.
The model don't needs support and no multi color printer, because the colored parts are separate and needs to be glued in place.
I decided to design it for installation without screwing. Thats why there are 3 slots in the back for “Damage Free Hanging Strips” from "Command". They are sized for size M, but size S will also do the job.
Finally the print settings: To be honest, it depends on your preferred surface texture. I printed it on the flat site (like the model is oriented).
The little hook prints best when you lay it on the front (flat) side.