Wall Key Holder with Tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
No screws. For printers above 30cm print volume.
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 97
- Makes
- 1
- Views
- 633
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
I created this wallholder for keys with a little tray for some stuff.
The model don't needs support and no multi color printer, because the colored parts are separate and needs to be glued in place.
I decided to design it for installation without screwing. Thats why there are 3 slots in the back for “Damage Free Hanging Strips” from "Command". They are sized for size M, but size S will also do the job.
Finally the print settings: To be honest, it depends on your preferred surface texture. I printed it on the flat site (like the model is oriented).
The little hook prints best when you lay it on the front (flat) side.