Gegenlichtblende für 50mm Objektiv Gewinde M55; Lens hood for 50mm lens thread M55
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gegenlichtblende für 50mm Objektiv Gewinde M55; Lens hood for 50mm lens thread M55
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Gegenlichtblende für ein 50mm Objektiv mit Filtergewinde M55 x 0,75.
Kann aufrecht stehend mit der großen Öffnung nach unten ohne Unterstützung gedruckt werden.
Sollte die Gegenlichtblende vignettieren, einfach im Slicer um ein paar Millimeter kürzen.
Für den Teil mit dem Feingewinde die Layerhöhe auf 0,1mm oder niedriger setzen, damit das Feingewinde auch fein ausgeformt wird.
…………….
Lens hood for a 50mm lens with an M55 x 0.75 filter thread.
Can be printed upright with the large opening facing down without support.
If the lens hood causes vignetting, simply trim it a few millimeters in the slicer.
For the part with the fine thread, set the layer height to 0.1mm or lower to ensure the fine thread is also finely formed.