Voron Side mounted Bowden retainer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully side-mounted Bowden retainer for Voron printers (or others if you desire)
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 25
- Wydruki
- 1
- Wyświetlenia
- 90
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Side-mounted mount to hold the bowden tube in place.
Due to the canopy on my printer, I was unable to use the original Voron bowden_retainer, which attaches to the top of the 2020 extrusion. So I made a new one, which is fully side-mounted. This model doesn't interfere with the enclosure panels either. Thus, you don't need to remove the retainer to remove your panels.
It's dimensionally and feature-wise completely based on the original Voron bowden retainer, so it will fit perfectly with your existing printer
My print details
| Feature | Detail |
|---|---|
| Printer type | FDM |
| Material type | ABS (It's externally mounted so any will do) |
| Nozzle | 0,4mm |
| Layer height | 0,2mm |
| Infil | 25% |
| Bed adhesion | No |
| Supports | No |
| Scaling | Not built in, account for shrinkage in your slicer |
Post-processing + Extra parts
- Can be mounted using the original M3x8mm screw and M3 Hammerhead T-nut.
- If your bowden tube won't fit, drill out the hole with a 4mm metal drill.
Tips & tricks
- Print in your accent colour. Thought it looked better.