1 / 2
Dust collection adapter Makita 2704N to 100 mm Hose
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for mounting a 100 mm dust collection hose to the Makita 2704N table saw.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 147
- Wydruki
- 1
- Wyświetlenia
- 1299
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (27)Powiązane
This is the simplest design for mounting a 100 mm dust collection hose to the Makita 2704N table saw (63 mm OD) I came up with.
Can be printed without supports. Depending on your setup a two-side brim will improve bed adhesion.
Update 2024: I've added a strengthened version with thicker walls and struts added at the side with the larger diameter.