Protective cover for Tolino Vision Color
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple cover to protect Tolino Vision Color (or Kobo Libre Colour) eReader device
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
(v1: simple version, v2: second version with grip, v3: third version with hole for stylus)
This is a very simple (but functional) protective cover for the eReader device Tolino Vision Color. Could as well work for Kobo Libre Colour (but untested).
The cover slides over the device to protect it. The buttons on the side remain open, to grap the device for removal of the cover. This cover is intended to be tight, be careful when removing.
Printed with PLA without support it worked as expected. When applied for the first time, it might feel too tight, after several applications it will slide better. The material might have some tension in the beginning, but this changes after some time of usage.
The magnetic stylus can still be attached, if the cover is fully in place (all versions). The device does not switch off automatically if the cover is in use.
Possible future improvements (but not included yet) are: use rounded edges, apply some arts on the surface, add magnet to enable auto-on-off feature, add extra protection for the stylus, add a paper clip, add a hole for the power button…