2.5in Exhaust Pipe Straight Line Marking Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jig/Guide for marking a straight line around 2.5in od metal pipe such as stainless exhaust tube.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 224
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
(this model is a work in progress and is subject to change) I recently got into metal fabrication and realized their is a serious lack of free templates and guides for cutting and marking pipe tubing etc. I've decided to try and fix this issue, so as I create tools and jigs I will post them here on printables.
Starting with this model, A straight guide for 2.5in OD exhaust tubing (or anything else 2.5in OD) simply slip this over your pipe, line up the inner edge with where you want your mark to, uncap your marker and go to town!
Its extremely useful for cutting exhaust on bandsaws such as the swag off-road band saw table, after marking where you want the cut on the band saw split the sharpie mark as best you can and you will achieve an extremely straight cut compared to eyeballing it. This is just one of many uses for this marking template.
Print Settings: I used a .25 speedy layer height with 20percent infill, it does not need to be the strongest thing in the world, you may have to scale the file slightly depending on your printers tolerances. Print it how you see fit!
Feel free to message me and follow me on instagram @skid_valve and @rangersdriftworks or on youtube @skid_valve