Filament Cutter TWIN blade for MMU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament cutter with two blades to cut filament in arrow shape
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 40
- Wydruki
- 3
- Wyświetlenia
- 321
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I didn't find any cutter who cuts filament in arrow shape, which is best if you have MMU3 unit. cutting with cutters is a pain… cutting wrong and filament will stuck when inserting.
This remix cuts on both sides at 45 degrees, so end result is nice arrow shaped tip. I used 18mm blades with narrow (double) segments, like this: https://www.aliexpress.com/item/32731131573.html - this is just an example, i'm sure there are cheaper out there…
Also base part is changed in a way so that indentation (chamfer) for filament inserting is only on one side, since this is important.
For a perfect arrow cut don't snap quickly all the way, but press gently so that blades grab filament and it centers on both blades, only then fully press/cut. Also make sure that both blades are equally inserted in top part.