1 / 3
Filament Cutter TWIN blade for MMU — image 1
1 / 3

Filament Cutter TWIN blade for MMU

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Filament cutter with two blades to cut filament in arrow shape

Rating
5 / 5
Likes
10
Downloads
40
Makes
3
Views
321
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

I didn't find any cutter who cuts filament in arrow shape, which is best if you have MMU3 unit. cutting with cutters is a pain… cutting wrong and filament will stuck when inserting. 

This remix cuts on both sides at 45 degrees, so end result is nice arrow shaped tip. I used 18mm blades with narrow (double) segments, like this:  https://www.aliexpress.com/item/32731131573.html - this is just an example, i'm sure there are cheaper out there…

Also base part is changed in a way so that indentation (chamfer) for filament inserting is only on one side, since this is important.

For a perfect arrow cut don't snap quickly all the way, but press gently so that blades grab filament and it centers on both blades, only then fully press/cut. Also make sure that both blades are equally inserted in top part.