Froyak / Action stove enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement enclosure for the Froyak/Action gas stove.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 54
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
I needed a stove for some hiking, but I didn't want to spend a lot of money, so I decided to buy the cheap Froyak stove from Action. However, I was not a fan of its appearance, so I made a spare enclosure.
!!!Warning!!! This part has not been approved by any control company, so its safety cannot be guaranteed. Use at your own risk. I accept no responsibility for any incident that may occur.
The enclosure consists of a top part, to which you screw the metal parts of the stove, and a bottom part that secures and compresses the gas canister in place when screwed into the top part. There are also anti-slip pads that fit into the holes in the bottom part.
The top part has ridges for flexible parts that will be added later. These parts could provide protection or support tools, among other things.
The pads can be replaced with custom designs to suit your needs.
The models are designed to be printed with minimal supports and numerous walls (4–5). As this is a large and heavy print, you may need a brim to prevent warping. To better handle heat and mechanical stress you should print this in PETG or ABS/ASA at least for the top part and TPU for flexible parts.
I hope you enjoy my work, even if it is not perfect. If you like it, please like, comment and share. You can also design your own special attachments for the ridges or rubber feet.