HSW - Command Strip Wall Mount For Top/Bottom
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Command strip to attach the honeycomb storage wall to the wall using command strip (x-large) and join 2 adjacent tiles
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 56
- Wydruki
- 1
- Wyświetlenia
- 381
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I am mounting more HSW tiles on my wall, and wanted to mix screws and command strips since each screw drills out a portion of my security deposit. I had trouble finding any models that attached the HSW on the top/bottom with command strips that will let it sit flush on the wall.
I designed this one quickly to do this.
Using slicer modifiers, I also added 4 6x3mm magnet embedded on the other side of the command strip for the hell of it (I figure maybe I'll have some metal I want to put on it, who knows?).
If you want to try this as well, add 4 negative modifier cylinders equally spaced in the command strip portion of the wall mount. Each should be the magnet diameter by its height plus a bit extra for inserting the magnets and tolerances; I did 6.2mmx3.2mm. Have them start at around 0.4mm height (2 layers). I included a picture showing the placement (hard to do since they are inside the base).
Print Settings:
- 4 Walls
- 30-35% infill (I used a modifier to go 10-15% on the command strip portion)
- Layers: 0.20mm
Line Width: Shouldn't matter