HSW - Command Strip Wall Mount For Top/Bottom
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Command strip to attach the honeycomb storage wall to the wall using command strip (x-large) and join 2 adjacent tiles
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 56
- Makes
- 1
- Views
- 381
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I am mounting more HSW tiles on my wall, and wanted to mix screws and command strips since each screw drills out a portion of my security deposit. I had trouble finding any models that attached the HSW on the top/bottom with command strips that will let it sit flush on the wall.
I designed this one quickly to do this.
Using slicer modifiers, I also added 4 6x3mm magnet embedded on the other side of the command strip for the hell of it (I figure maybe I'll have some metal I want to put on it, who knows?).
If you want to try this as well, add 4 negative modifier cylinders equally spaced in the command strip portion of the wall mount. Each should be the magnet diameter by its height plus a bit extra for inserting the magnets and tolerances; I did 6.2mmx3.2mm. Have them start at around 0.4mm height (2 layers). I included a picture showing the placement (hard to do since they are inside the base).
Print Settings:
- 4 Walls
- 30-35% infill (I used a modifier to go 10-15% on the command strip portion)
- Layers: 0.20mm
Line Width: Shouldn't matter