X-shot MPP Stock-ish Wide charging handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Friction fit wide charging handle extension for the X-Shot Piston Pump.
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 161
- Wydruki
- 2
- Wyświetlenia
- 673
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Interference fit wide charging handle for the X-shot Motorized Piston Pump. I didn't like how narrow the release was, so this one allows for you to technically pull it from only one side of the blaster. It is very wide, so much so that you basically cannot miss the handle assuming no matter how sloppy your release is.
uhh, there's also a looser fit version because my printer might be under extruding a little, -0.1 mm on all sides. The .step file is also there if the fit still doesn't work.
HARDWARE NEEDED
No additional hardware
PRINT SETTINGS
Top face on build plate. 5+ perimeters, PETG recommended.