Gel electrophoresis comb holder for acrylic comb
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D model of a gel comb holder for electrophoresis. Fits the BR wide system. Can customise number and size of wells.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution — Noncommercial
Model fits the BR wide system, and was designed to reduce laboratory costs.
The dimensions are (171 x 24.5 x 5 mm), excluding the nubbins for slotting into casting tray.
Slot fits an acrylic comb that is 1.5mm thick. Dimensions of the acrylic should be 127 x 26 mm, with 1 mm gaps between wells. Comb is then glued into place in the 3D-printed slot. Acrylic was used so that clean and consistent wells were cast.
Files for the laser cut comb are provided in svg and pdf formats.
Comb can be cut with a laser cutter in a local maker-center or ordered online for a reasonable price. Cost approx. $6 per comb from a custom laser cutting service.
Listed as non-commercial so that we can keep science cheap and accessible for all. Please do not use this design to make money :)