1 / 2
Extruder Dyes for Handles for Brent Extruder — zdjęcie 1
1 / 2

Extruder Dyes for Handles for Brent Extruder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dyes for handles used for the Brent clay extruder. 4.5in diameter.

Ocena
0 / 5
Polubienia
3
Pobrania
27
Wydruki
0
Wyświetlenia
138
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Public Domain

Some basic dyes for extruding handle shapes from a Brent brand clay extruder: https://shop.amaco.com/brent-extruder-hd/

Comes with a selector to choose the profile extruded.

NOTE:  Adjust the Z height of the pieces to increase strength if printing with PLA.  Recommend about ½ in.  High or 100% infill, and several walls.  There is a lot of backpressure this plate has to survive.  I have tested with very firm clay and the smallest setting at 1/2in thick, 20% infill, 5 walls, 5 top and bottom, and it worked fine.