1 / 2
Extruder Dyes for Handles for Brent Extruder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dyes for handles used for the Brent clay extruder. 4.5in diameter.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 27
- Makes
- 0
- Views
- 138
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Some basic dyes for extruding handle shapes from a Brent brand clay extruder: https://shop.amaco.com/brent-extruder-hd/
Comes with a selector to choose the profile extruded.
NOTE: Adjust the Z height of the pieces to increase strength if printing with PLA. Recommend about ½ in. High or 100% infill, and several walls. There is a lot of backpressure this plate has to survive. I have tested with very firm clay and the smallest setting at 1/2in thick, 20% infill, 5 walls, 5 top and bottom, and it worked fine.