1 / 6
5mm Thermistor Holder - Repair bushing for gluing
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Repair bushing to be glued in if the 3mm holder breaks when trying to drill out to 5mm.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 15
- Wydruki
- 1
- Wyświetlenia
- 158
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (12)Powiązane
Repair bushing to be glued in, if the 3mm holder breaks when trying to drill out to 5mm.
I didn't want to reprint the new version of the heater with the larger 5mm thermistor holder, so I decided to repair it using this bushing (extracted from the current model).
Repair:
1. Drill out the old 3mm holder to a diameter of 10mm.
2. Print the repair bushing.
3. Align and glue the bushing in place using heat-resistant superglue.