127 modeli
The centauri carbon has a chamber thermistor that is mounted to the frame with a steel screw and plastic spacer. The steel screw is thermally conductive enough to significantly skew chamber temperatures colder. I found that the built in…
➡➡Add the SimpleAF logo to the backdrop of your printer. ⬅⬅ Model Options Single Color Color Swap Multi Color Filament Requirements PETG ABS ASA ⬅ preferred Colorized Model Import Instructions Step 1: Step 2: Step 3: Step 4: .3mf files…
This is a twist-in 3030 extrusion mount for the Thermistor found inside the Sunlu S4 Dehumidifier. The mount uses the screws that held the thermistor in place inside of the S4 unity.
The centauri carbon has a chamber thermistor that is mounted to the frame with a steel screw and plastic spacer. The steel screw is thermally conductive enough to significantly skew chamber temperatures colder. I found that the built in…
Tool for remove the XH 2pin connector nozzle heater of centauri carbon Updated (16Feb26): Added New puller for ZH 2pin with printed spring. Updated (15Jan26): Added New puller for XH 2pin with printed spring. This version prevents the…
Remixed (rebuilt) Voron 2.4 z-chain relocation mod w/thermistor mount from 2-hole IGUS to 3-hole generic chain mount.
These sensors are not very robust. Protect it! PLEASE be careful when inserting this model into the fan grill. It's designed to snap in. Insert the bottom edge first and then rotate the part up to insert the top edge while gently wiggling…
Holder for 3950 Thermistor for chamber temp that screws on the 2020 extrusion on ZeroG frame. It uses one M3x5x4 Voron style heat insert to secure the thermistor to the holder. Its made for use with two M3x8 sockethead screws and two M3…
This is a clip-on thermistor mount for a Voron chamber designed for 2020 aluminum extrusion . Suited for thermistors with 3mm diameter. Unlike the original mount, this version clips directly onto the extrusion and does not require screws,…
A modified version of Jeoje's Z chain guide with integrated thermistor (side-) mount for Voron v2.4 printers.
Klipper Expander Cover with clearance for the Thermistor terminations as to prevent pinching the connectors when in closed. this print is really dependent on tollerances so can recemend you slightly scale down the model as i have found it…
I accidentaly bought the wrong thermistor and didn't want to buy another one, so I found the original model by @MapleLeafMakers and thank god they've left the step file. So I quickly adjusted it for the 3950 100K thermistor. This is a…
This thermistor holder fits any 3mm thermistor I do upgrades and modifications for the Tiny-M printer. You need help with the Tiny-M or a project proposal, please contact me!
4th wago for earth holes to push the wago out Microfit for thermistor with wire routing inside the extrusion works with both 2pin mf versions the U shaped microfit side down, the | | side with the connector nub up
I recently had to replace the heater cartridge and thermistor on my Prusa MK3S+, and I realized it's a pain to undo the cable bundle and unplug the connectors from the Einsy RAMBo board. As I'm often messing around with the hotend…
This is a twist-in 3030 extrusion mount for the Thermistor found inside the Sunlu S4 Dehumidifier. The mount uses the screws that held the thermistor in place inside of the S4 unity.
Simple enclosure for a generic 3950 thermistor (the ones with the glass bead). Can be used to mount to 2020 aluminum extrusions. Additional Hardware needed: 1x M3x8 SHCS 1x M3 Hammer (T) Nut
It fits perfectly with the 3 mm diameter thermistor. It can be used with this mod: https://www.printables.com/model/960049-modular-cable-management-clips-for-2020-extrusions
This is a fix to a problem you didn't realize you had! *****PLEASE READ THE FOLLOWING BELOW. THIS GOES INTO FURTHER DETAIL AS TO WHY THIS PART IS IMPORTANT/USEFUL***** The K1 Series printers chamber thermistor is in a direct path to where…
I had some glass thermistors lying around and want to use one for my Voron0 as chamber thermistor. I had a look at the 2020 Mount from Nikholas Pcenicni and took his model as reference for my own design. I'm aware, that the Openscad file…
Lets you clip a 5 or 3 mm diameter tube chamber thermistor on your printer's 1515 extrusion frame
Although it is just fine for the extruder motor in direct drive to run hot, it will, thats what it does. The problem is that the HGX Lite extruder (all metal) is a great heatsink for the motor, so it gets very hot too. When it is hot…
⚠ Your Z extrusions must be threaded on the top! ⚠ This mod requires a new back plate with holes for the wires! (Printer specific, there are tons of options online. Print as needed.) Please check the → GitHub page ← for more information…
A compact and elegant Voron chamber 4mm thermistor mount
Printed with ASA 0.2 layer in app. 25 minutes on the K1 Max
Process is pretty simple: Cover part with vaseline, then heat it a little bit so it fills the voids Take off jst connector so you wires can go through center hole push some rtv (anything red should work for sure) through bigger hole while…
This PTC heater holder will help you mount it to the top of the 4020 aluminium extrusion. With the 45 degree rotation the enclosure panels won't choke the heater fan. Also there is a thermistor holder. With this you can monitor the air…
If you enjoy this model, please give it a like! This took ages to get right, and I hope to put this kind of effort into more parts. 2020 Extrusion clip with a 3mm diameter thermistor holder. No hardware needed at all, just push in and it…
For mounting a chamber thermistor on the gantry, but this time with the Voron logo the right side up. Includes the Fusion file so you can change the thermistor size for you liking. To do so, change the ThermistorSize parameter.
Front Adaptor space for Thermistor cables Filament sensor add it to the top. space for the screws of the Phaetus
I redesigned the chamber thermistor mount to have the thermistor and wire outputs be opposite instead of at a right angle to each other. This is better for my use case, as it allows me to mount it on the bottom back extrusion of my Voron…
I wanted a single bracket to hold a camera and a chamber thermistor, along with the camera being on the right side - closer to the Pi. Camera is set pointing down at 10 degrees for best visibility. Use M2x8 (or shorter) self tapping for…
Quick and dirty magnetic mount for NTC100K Thermistors. I needed a quick way to attach to motors to watch temps. Will need 2x 6mmx3mm magnets. Press fit.
Hello! If you've got a COREBOXX or similar MMU setup, your PTFE tube from the MMU selector to the nozzle may be pushing against the chamber thermistor. I'm afraid this could cause problems over time, so I did a quick search for a…
Repair bushing to be glued in, if the 3mm holder breaks when trying to drill out to 5mm. I didn't want to reprint the new version of the heater with the larger 5mm thermistor holder, so I decided to repair it using this bushing (extracted…
The Core One Printhead Left Cover with cutouts for access to the heater and thermistor connectors. There is a compromise I made between the ease of removing the connections, printability, and still functioning as protection of the rest of…
Remix of Umbilical Z for Voron 2.4 with support for a chamber thermistor
Here is a PT100/PT1000 thermistor mount for an Ender 3 NG v1.2! It is designed to have a look similar to the Ender 3 NG v1.2's original parts. There's a cable tunnel on the back that gently holds the thermistor in-place with its own…
For use with a PTC chamber heater module. Mounts to the right panel using the stock mounting points. You will probably need longer m3 screws. The termistor mount replaces the the plastic spacer the CC's chamber temperature sensor is…
Hello, this is my first model. Didn't like idea to use metal M3 screw (and I don't have one) so I created some kind of retainer from plastic instead. Works with original model (attached into my STL, all credits to Robert Samples), snaps…
The GratKit filament dryer does very well, but the thermistor mount in the bottom is attached to the bottom and sometimes loses adhesion. The thermistor moves around or falls out causing the heating plate to burn up the polyimide film…
Update 2025-12-11: Added a version that just snaps into place. No unscrewing of the screws needed and cannot come loose since it's locked by the screw heads. I think the idea of a protector for the flimsy thermistor is brilliant, but…
I needed a way to mount my humidity/temperature sensor to my filament dryer (aka a regular old food dehydrator). So I threw together this design that mounts it at a 45° angle using screws. The features are as follows: - 3 x 3mm screw…
There are two different housings. The standard housing is to be mounted on a horisontal 2020 extrusion like in the pictures. The other one is for mounting it on a vertical extrusion. Both use the same back cover. The models are oriented…
A little box for my nozzles for the Kobra S1 with upgraded hotend. The lettering on the lid and the base is made with an modifier. Feel free to do your own or use mine within the *.3mf-File
A little box for my hotends for the Kobra S1. The lettering on the lid and the base is made with an modifier. Feel free
Tool for remove the XH 2pin connector nozzle heater of centauri carbon Updated (16Feb26): Added New puller for ZH 2pin with printed spring. Updated (15Jan26): Added New puller for XH 2pin with printed spring. This version prevents the…
Remixed (rebuilt) Voron 2.4 z-chain relocation mod w/thermistor mount from 2-hole IGUS to 3-hole generic chain mount.
◼ Voron Trident (AK Stealth Wires) thermistor mount hides the Siboor fume pack Fan PCB, an NTC 3950 100K Thermistor, and the wiring inside the 2020 extrusion profiles for a stealth look, created as part of the AK Stealth Wires project.…
Need some simple frame mounts for chamber thermistors based around 3mm thermistors that most people use for chambers. Made versions for both 1515 and 2020 based frames. I've provided the or
These sensors are not very robust. Protect it! PLEASE be careful when inserting this model into the fan grill. It's designed to snap in. Insert the bottom edge first and then rotate the part up to insert the top edge while gently wiggling…
Holder for 3950 Thermistor for chamber temp that screws on the 2020 extrusion on ZeroG frame. It uses one M3x5x4 Voron style heat insert to secure the thermistor to the holder. Its made for use with two M3x8 sockethead screws and two M3…
This is a clip-on thermistor mount for a Voron chamber designed for 2020 aluminum extrusion . Suited for thermistors with 3mm diameter. Unlike the original mount, this version clips directly onto the extrusion and does not require screws,…
A pair of simple, universal mounts for securing thermistors using a 5 mm zip‑tie. Designed to strap onto steppers, extrusions, or any small flat surface where stable temperature readings are needed. 🔧 Two Versions Included • Bead version…
Pug Gantry Mount Remix: Toolhead Umbilical & Thermistor Option Overview This project is a functional remix of the Pug Gantry Mount (Upper) . It was developed to provide a clean, integrated solution for users transitioning from traditional…
Installation Simply insert the thermistor into the holder and route the cable through the slot towards the inside of the cover. Then mount the part from the inside using a screw, exactly the same way as the original design. No additional…
sock mold with the heater and thermistor on the bottom. the shell is a two part design that needs 4 m3 bolts with nuts. after assembly of the shell follow the instructions of the original designer. After the silicone cured and "hardened"…
Thermistor mount that clip directly on 3030 extrusion frame of your printer/enclosure allowing monitoring of inside temp. Compatible with cylindrical thermistor with diameter of 3 mm Code example for using with Klipper on a BTT Octopus…
Mounts to 4040 extrusion using M4 bolts and T nuts. I used countersunk bolts for a flush finish. Print in PETG / ABS / ASA or any high(er) temperature filament. Built and available on OnShape if you need to make adjustments.
A simple bracket to mount a 5x30mm thermistor cartridge to a 2020 extrusion. The thermistor is held by a slight press fit. Hardware you need: 1x M3x8mm Socket Head Cap Screw 1x M3 T-Nut/Roll-In-Nut 2x Cable Tie 2022-12-03: Added a 3mm…
The original E3D V6 thermistor catridge is equipt with a Molex Micro-Fit 3.0 connector close to the cartridge. Together with the E3D High Precision Heater Cartridge , which has the same connector, it is possible to swap the hotend without…
This mount holds a small thermistor to to capture chamber temperatures for an enclosed printer. This is used on a Voron V0, but it will fit on any 1515 extrusion Printed with ABS Infill: 40%
5mm chamber thermistor mount you will need to print this in something that can handle your expected chamber temps, i chose ABS. parts needed thermistor m3 x8 socket or button head screw m3 t-nut
This mount holds a small thermistor to to capture chamber temperatures for an enclosed printer. This is used on any printer that uses a 2020 extrusion. Printed with ABS Infill: 40%
This is a modified version of Jeoje's Voron V2.4 Z Chain Guide with Integrated Thermistor Mount . This Z chain mount allows you to install a standard 3mm thermistor to monitor chamber temperatures. Jeoje's original was designed for the…
I'm using a thermistor from an old printer for a chamber sensor. I remodeled Triano's mount to accept a smaill zip tie to hold it in place.
I used an old thermistor from an ender3 hotend and added following into Klipper / printer.cfg: [temperature_sensor chamber] sensor_type: EPCOS 100K B57560G104F sensor_pin: PF5 min_temp: 10 max_temp: 80
I wanted to mount my chamber thermistor at the top rear of the build space of my Voron V2. I also installed a CAN Bus toolhead with an umbilical cable, as well as a Nevermore Micro Duo V5, and removed the rear exhaust fan. This exhaust…
A remix of my solid plate , for those who want to keep the rear exhaust housing in place. STEP file provided if you want to make any changes.
Thermistor holder, which was created for 3030. With it you can measure e.g. the housing temperature. I Use this 100k Sensor: https://de.aliexpress.com/item/4001345867305.html Add this to the printer.cfg: [thermistor chamber_temp]…
Just a modification of the original Voron Z-Chain Guide to attach an additional chamber thermistor to your gantry. The thermistor (e.g. a glass bead thermistor) is positioned inside the Z-guide and held in place with a small zip tie or…
I updated my V0.1 to the new V0.2 bottom Z endstop and had an unsightly hole in my back panel where the switch used to pass through. I decided to remix samwiseg0's NTC100K thermistor mount to fit in that space and cover the hole while…
BOM: SHCM3x30mm [1x] M3 Voron heat-set insert [1x] Compatibility: Voron ClockWork2 Extruder; CW2 style mounts for other extruders, as long as they feature the mounting hole previosuly used to engage the latch. Warning: the ring notch on…
This is a replacement silicone cover for the original E3D V6 (new version). The original cover does not stay in place. Just print all 3 parts, connect them and mold your cover. Instructions: Print everything with about 20%-25% infill. You…
V0 Chamber Thermistor Mount A mount for a standard 3x15mm cartridge thermistor on 1515 T-Slot Extrusion Designed for the Voron V0 BOM 1x M3x8mm BHCS 1x M3 Nut 1x 3x15mm thermistor The most up-to-date version of this mod can always be…
This model is a remix from Maple Leaf Makers and the excellent V0 chamber thermistor mount. Just adapted to the 2020 extrusions fitted for the Voron 2.4/Trident . BOM 1x M3x8mm BHCS/SHCS 1x M3 T-Nut 1x 3x15mm thermistor
Removed the gap for the thermistor connection.
Tisk : PLA print detail 0,28mm. Hardware : MAX7219 matrix display + logic unit WeMos D1 Mini + optional 3x round magnet 11mm + optional thermistor DHT22 Firmware : pyramidak parola firmware (firm.jantac.net)
This mount for an extrusion keep wires and thermistors in place. I made it long enough to have some strain relief, though I do include a shortened version handy for tight spaces. The models are designed for LD0 2020, Misumi 1515, or…
This is an improved (out of necessity) version of my own MK3 style heatbed cover for the Prusa Mini. It still features: MK3 style; Allows for heatbed connectors on top for optimal current flow; Reliefs the cable and helps prevents…
If you get these from amazon they were 50 degrees off for me and I spent 2 days calibrating them, after calibrating I could print PLA as normal instead of at 220c and now I can get the wood grain effect with my wood filament.. If you…
This remix will fit 5mm diameter Thermistor sensor, and you could easy modify the hole in the step file to fit your sensor.
This was made to accomodate a Frame thermistor or running other cables through the skirt and along the Z extrusion for maybe a Chamber Thermistor or whatever else you want to route there. As you can see from the pictures, I used it to…
This holds a 5mm thermistor ( example ) to a 2020 extrusion, for Voron or other 2020 frame printers. BOM 5mm thermistor (1) M3 6mm cap head screw (1) 2020 extrusion nut of your choice CAD [ Link ] Thermistor diameter is parameterized
I chance the mount from HenryA a little bit to fit on my v0.2 with the 1515 extrusions and a 3mm thermistor the Thermistor fits very good on my print. if yours to tight you can open the hole a bit with a drill bit
A simple mount for a chamber thermistor, and attaches to a 2020 frame using an M3 x 6 SHCS with a M3 T-Nut. The You can use a small zip tie to prevent any movement while the machine is running, but the thermistor should be friction fitted…
Hi, this is the Chamber Thermistor holder I use on my own LDO Rev. C Voron 2.4r2. I didn't like to see the Chamber thermistor the way the LDO holder attaches, so I designed this from the LDO .f3d file, and like how it works much better.…
Print with standard Voron settings, add a M3 heatset and screw in the thermistor.
Printed with same standard voron settings. This remix is for those who did an LDO build and the original cover doesnt fit, so this got remixed to make it work proper. original credit goes to @MaxDolski_1033657 Thanks and hope this helps…
Modified both main body and cable cover to provide access to the thermistor header
